Important Safety Precautions and Explanation of Symbols
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltages within the enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the
Stealth SP-1. After successful installation and configuration of the Stealth SP-1, be sure to
retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and
follow all instructions and heed all warnings on the SP-1 and in this manual. The vast majority
of the subsequent safety precautions are common sense. If you are not comfortable with the
installation of professional audio/video equipment, you should seek the services of a qualified
installation professional or call us for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THE
STEALTH SP-1 NEAR WATER OR IN WET LOCATIONS, DO NOT EXPOSE IT TO RAIN
OR MOISTURE, DO NOT EXPOSE IT TO DRIPPING OR SPLASHING FROM OTHER
SOURCES, AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS (SUCH AS VASES)
ARE PLACED ON IT. DOING SO MAY RESULT IN DAMAGE TO THE UNIT AND THE RISK
OF ELECTRIC SHOCK, WHICH MAY RESULT IN BODILY INJURY OR DEATH.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THE
STEALTH SP-1. THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE UNIT. REFER
ALL SERVICE TO QUALIFIED SERVICE PERSONNEL.
Do not install the Stealth SP-1 near or above any heat sources such as radiators, heating
vents, or other apparatus that produce heat. Do not block any ventilation openings or heat
sinks. Avoid installing the unit directly above other heat-producing equipment unless sufficient
ventilation or forced-air cooling is provided.
Do not install the Stealth SP-1 in locations without proper ventilation. The Stealth SP-1 should
not be operated on a bed, sofa, rug, or similar surface that may block air flow to the heat
sinks. The unit should not be mounted against a surface or in an enclosed location such as a
bookcase, cabinet, or closed equipment rack unless sufficient ventilation is provided.
Always install your Stealth SP-1 according to the manufacturer’s instructions and only use
attachments or accessories specified by the manufacturer.
Connect the Stealth SP-1 only to power sources of the correct voltage (as shown in this
manual and on the Stealth SP-1 unit).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be
especially careful where the power cable enters the power outlet and the unit.
Only connect the Stealth SP-1 to an electrical outlet or extension cord of appropriate type and
rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins
or using unsafe adapters. A polarized plug has two blades - one wider than the other.
A grounding plug has a third ground prong in addition to the two main conductors. The wide
blade or third groundling prong is provided for your safety. If the provided plug does not fit
your outlet, consult an electrician to replace your obsolete outlet. If you replace the power
cord, only use one of similar type and equal or greater current rating.
!
!
