Emotiva ERC-3, Руководство пользователя

Страница: 14 / 28

Page 10
ERC-3
ERC-3 Rear Panel
TRIGGER TRIGGER
OUTPUT INPUT
12V DC 5V-12V DC
COAXIAL OPTICAL AES/EBU
-------------------- DIGITAL OUTPUTS --------------------
BAL-R BAL-L
------------------------- ANALOG OUTPUTS -------------------------
UNBAL-R UNBAL-L
INPUT VOLTAGE
POWER
FUSE
ON
OFF
115
7 10 11 9 8
1 5 6 3 4 2
When playing standard Red Book audio CDs, all digital outputs on the ERC-3 are bit-perfect,
and will operate at the sample rate and bit depth of the CD being played (Red Book CDs are all
recorded at 44.1 kHz / 16 bits). When playing MP3 audio files, the digital audio will be output as
stereo PCM at 44.1 kHz / 16 bits (but the audio quality will depend on the bit rate at which the
MP3 files themselves are recorded).
1. Coaxial (S/PDIF) Digital Audio Output
Connect this electrical S/PDIF digital output to the appropriate input on an external DAC or
preamp/processor. For best results, use a high quality 75 ohm cable intended for digital audio.
2. Optical (Toslink) Digital Audio Output
Connect this optical (Toslink) S/PDIF digital output to the appropriate input on an external DAC
or preamp/processor. For best results, use a high quality Toslink optical cable intended for digital
audio.
3. AES/EBU Digital Audio Output
Connect this AES/EBU digital audio output to the appropriate input on an external DAC or
preamp/processor. AES/EBU is a high quality digital audio transmission standard often used
on professional equipment in studios. It can carry digital audio signals up to 1000 feet, and has
excellent immunity to noise and interference.
Note: Both the balanced (xlR) and unbalanced (RCA) analog audio outputs on the ERC-3
remain active at all times.