Emotiva BASX, Руководство пользователя

Страница: 13 / 28

Page 9
BasX Subwoofers
3. Volume Control
This control sets the relative gain of your BasX sub. Use this control to set the amount of bass
delivered by your BasX sub to be a good match for the output of your main speakers.
4. Power Mode Switch
Note: Your BasX sub will only operate if the AC POWER Switch is turned ON. If the AC POWER
Switch is OFF, your BasX sub will NOT operate, and the Power Mode Switch will have no effect.
When the Power Mode Switch if set to Off, the BasX sub will NOT operate.
When the Power Mode Switch is set to On, the BasX sub will remain On continuously.
When the Power Mode Switch is set to Auto, the BasX sub will turn On automatically when
incoming audio is detected. Once the BasX sub is On, it will remain On for several minutes; if no
audio is detected after several minutes, the BasX sub will return to Standby Mode.
5. Power Indicator
The Power Indicator will be illuminated blue when the BasX sub is On, and will be illuminated red
when the BasX sub is in Standby Mode.
6. Inputs (unbalanced)
The BasX subwoofer has two unbalanced line level audio inputs. If your source provides a mono
full range or subwoofer output, it should be connected to the white input - labelled LFE. If your
source provides a stereo subwoofer or full range output, the two channels should be connected
to the red and white unbalanced inputs (the two inputs are summed - and it doesn’t matter which
is which).
7. Outputs (passthrough)
The passthrough outputs on the BasX sub are provided to allow you to connect a second
subwoofer, or a set of full range speakers in a second zone. The passthrough outputs are stereo,
unbuffered, and remain active even when the BasX sub is Off. The red output is connected directly
to the red input jack, and the white output is connected directly to the white input jack.
8. Line Voltage Selector
This switch is used to select the appropriate line voltage for your area.
Note: Be sure to set this switch to the correct line voltage for your area. If you fail to do so,
damage to your BasX sub may result.
Note: If you change the Line Voltage setting, you should also change the FUSE in the BasX to the
appropriate value (one fuse in each value is provided with your BasX subwoofer).