Emotiva BasX PT1, Руководство пользователя

Страница: 30 / 40

Page 26
BasX PT1 and BasX TA1
Connecting speakers to your BasX TA1
To connect your TA1 to a pair of speakers simply connect the speakers to the Left and Right
Speaker Outputs on the TA1.
Set the Crossover Switch on the TA1 to Full Range.
ANALOG OUTUTS
L
R
MAIN
OUT
X-OVER OUT
MONO
LP (90Hz) HP
HIGH PASS
|
|
FULL RANGE
SPEAKER OUTPUTS
R L
TA1
Set Switch to
FULL RANGE
BasX TA1 with Two Speakers
Connecting speakers and a subwoofer to your BasX TA1
To connect your TA1 to a pair of speakers and a subwoofer, connect the speakers to the Left and
Right Speaker Outputs on the TA1, and connect the LP Xover-Out to the input on your powered
subwoofer. Set the Crossover Switch on the TA1 to High Pass. If your subwoofer has an LFE input
then use that; if not, then use a normal input, and set the crossover frequency on your subwoofer
to its highest setting to use the active bass management crossover in the TA1.
ANALOG OUTUTS
L
R
MAIN
OUT
X-OVER OUT
MONO
LP (90Hz) HP
HIGH PASS
|
|
FULL RANGE
SPEAKER OUTPUTS
R L
POWERED
SUBWOOFER
TA1
Set Switch to
HIGH PASS
BasX TA1 with Two Sp Subwoofer
Note: The active bass management high-pass filter is always applied to the HP Xover-Out
outputs on the TA1. The setting of the Crossover Switch controls whether the active high-pass
filter is applied to BOTH THE MAIN OUTPUTS AND THE SPEAKER OUTPUTS.