Emotiva basX A-100, Руководство пользователя

Страница: 13 / 28

Page 9
BAS
X
A
-100
5. Line Voltage Selector Switch
The BASX A-100 is designed to operate on either 115 VAC or 230 VAC. Use this switch to select the
appropriate line voltage for your area.
Note: The A-100 will not operate correctly, and may be damaged, if the incorrect line voltage is
selected.
6. Trigger Input and Output
The Trigger Input allows the trigger signal from another piece of equipment to switch the BASX
A-100 On and Off.
The Trigger Output on the BASX A-100 acts as a
TRIGGER PASS THROUGH . The Trigger Output on
the A-100 will send a trigger signal whenever the Trigger Input on the A-100 is receiving a Trigger
Input.
Note: How the BASX A-100 responds to a trigger signal will depend on the Trigger Switch
setting. See Triggering the BASX A-100 for details.
Note: The Trigger Output on the A-100 acts as a hardware pass through, which is somewhat
different than how the trigger outputs on most consumer audio equipment work; this behavior
is geared more towards the typical way in which a “zone amplifier” is configured.
• The Trigger Output on the A-100 will send out a trigger signal whenever a trigger signal is
present at the Trigger Input - even if the A-100 is fully Off.
• The Trigger Output will NOT send a trigger signal when the A-100 has been turned on by
something other than a Trigger Input signal. (The Trigger Output will NOT send a trigger signal
if the A-100 has been turned on manually, or by detecting an audio signal at its input.)
7. Trigger Switch
The Trigger Switch determines how the A-100 responds to incoming trigger signals and incoming
audio. Please refer to Triggering the BASX A-100 (below) for details.
8. Power Cord Receptacle
Use this receptacle to attach the included power cable for the BASX A-100.