EMOTION EHS 550, Руководство по эксплуатации

Страница: 5 / 15

For models Aastra 6735i, 6737i, 6753i, 6755i and 6757i
only - Aastra DHSG cable kit required - available from
your Aastra reseller.
1. Insert the Blue plug on cable A into the
AUX port at the back of your W860/W880
headset base. Insert the clear plug on
cable A into the H/S EHS port on your EHS box.
2. Connect cable B (supplied with your headset)
into the TEL port on the bottom of your
W860/W880 headset base and the other end
into the ‘Audio In’ port on the EHS box.
3. Connect cable D to the ‘DHSG’ port of your
EHS box and the other end to the
RJ-45 Coupler (supplied with the Aastra cable
kit). Connect the blue end of the Aastra DHSG
cable to the other side of the coupler.
4. Connect the yellow connector to the
expansion module port on the back of your
telephone.
5. Connect the green connector to the headset
port of your telephone.
6. Set the Audio Mode to Headset/Speaker on
your phone. (Options->Preferences->Set
Audio->Audio Mode->Headset/Speaker).
7. For full headset functionality, disable the
“Goodbye Key Cancels Incoming Call”
parameter. (Aastra Web UI, Basic Settings
->Preferences->General).
2
+
A
U
X
W880 Base (Rear View)
W880 Base (Underside View)
1
A
B
D
RJ-45 Coupler
(Supplied with Kit)
5
4
3
POLYCOM
MSH PLX MIC
DHSG
ALCA
TEL
H/S EHS
AUDIO OUT
AUDIO IN
EHS 550