Emos P5822, Руководство пользователя

Страница: 2 / 84

2
GB | Digital Power Meter
Device description
The power consumption metre P5822 (hereinafter referred to as metre) is an electronic
device which measures power consumption and can also calculate and display operating
costs of the measured appliance on a graph. The graph can be set up to display the last
7 days/weeks/months. This function allows the user to reduce power costs and decrease
CO
2
emissions.
Specifications:
Nominal voltage: 230–240 V~/50 Hz
Nominal current: max. 16 A
Max. load: 3 680 W
Operating voltage: 175–276 V~/50 Hz
Period recorded: 0 s to 9 999 days
Operating temperature: 0–50 °C
Measuring range: 2 to 3 680 W
Power consumption range: 0 kWh to
9 999 kWh
Battery: 2× 1.5 V (LR44/AG13)
Use in normal dry conditions with relative humidity ranging from 20 to 90 %
Connection:
First, remove the plastic ring from the battery space at the rear
of the metre, as shown in the picture. The installed batteries
2× 1.5V (LR44/AG13) are used to power the metre memory.
Then, connect the metre to a 230 V~ power network. Do not
connect any appliance to the metre yet. If the display of the metre
does not show any data or the data is difficult to read, press the „RESET“ button using
a sharp pointy object such as a pen or a pencil. Then, the screen will display all characters
as shown on the figure below. This display will remain for ca 3 seconds.
Display settings:
1. current time setup
1.1 Press and hold the „SET/OK“ button for 3 seconds. You will enter the settings mode
and the clock icon will start blinking.You can change the time values using the buttons
„“ (increasing values) or „COST/-“ (decreasing values). Pressing the „HISTORY“
button will switch between hours and minutes. Once current time is set, press „SET/OK“.