Emos N3113, Руководство пользователя

Страница: 4 / 56

4
Connection procedure – socket no. 1:
1. Current and input power – check the appliance’s label to make
sure it uses the appropriate current and input power in mA and
W. The value must be equal or lower than 2,250 mA and 27 W;
valid for plugging in the cable via connector 1.
2. Output voltage can be adjusted – use the turn switch to set the
desired voltage based on the appliance. The turn switch is located
on the bottom side of the power supply so that there is no risk
of accidental switching of the voltage value during operation.
3. Output connector – choose a connector suitable for your
appliance (you can test by plugging into the socket in the
appliance first).
4. See the figure for connector polarity.
5. Connect the power supply to a network which meets the 100–240
V~, 50/60 Hz parameters of the device. If the indicator lights up,
the power supply is working.
6. If the appliance does not run or runs incorrectly, immediately
disconnect the power supply from the appliance.