Emos N3110, Руководство пользователя, Страница: 4 / 48

4
on the bottom side of the power supply so that there is no risk
of accidental switching of the voltage value during operation.
3. Output connector – choose a connector suitable for your
appliance (you can test by plugging into the socket in the
appliance first).
4. Choose the connector‘s correct polarity according to the label
on your appliance. Then insert it into the socket at the end of the
cable of the AC adapter. See the scheme below:
5. If the appliance is not being charged or it doesn‘t work, the most
probably the voltage polarity of the charging source needs to be
changed. Disconnect the charging connector immediately from
the socket of the charging source, turn it about 180 degrees and
insert it into the cable again.
6. If the appliance does not run or runs incorrectly, immediately
disconnect the power supply from the appliance.
Do not dispose of electrical appliances as unsorted municipal
waste; use sorted waste collection points. Contact local author-
ities for up-to-date information about collection points. If
electrical appliances are deposited in waste landfills, hazardous sub-
stances may leak into the groundwater, enter the food chain and harm
your health.
EMOS spol. s r.o. declares that product N3110 is in compliance with the
essential requirements and other applicable provisions of directives.