Emos J6014, Руководство пользователя, Страница: 11 / 116

11
Audio modes: Mono/Joint Stereo/Stereo
Sampling frequency: 32, 44.1 & 48 MHz
Power supply: AC 100–240 V, 50/60 Hz, or 12 V/ 1 A
Produced under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby
Laboratories.
DVB and DVB logos are trademarks of DVB Project
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or regis-
tered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Troubleshooting FAQ
If you discover any fault or malfunction, check whether it is listed below in the table of most common
problems to find a quick solution. If you do not find the answer or have any other questions, contact the
supplier’s customer support line.
Problem Possible Cause Solution
The red indicator does not light
up when in standby mode.
Cable unplugged
Burned fuse in the device
Check that the power cable is
plugged in. Check the fuse
Signal not found.
The antenna is not connected.
Incorrect antenna settings. You
are in a location without signal
coverage.
Check the antenna's connection.
Move the antenna. Contact a
local specialist company.
No image or audio.
Scart/AV/HDMI not chosen in the
input selection on your TV.
Switch to the correct input on
your TV's remote.
"Encoded channel" appears on
the screen.
The channel is encoded Choose a different channel.
The remote does not work.
The receiver is off. The remote
is not aimed directly onto
the device. The front panel is
obscured by an obstacle. Faulty
batteries in the remote
Turn the receiver on. Aim the
remote directly onto the front
panel of the device. Remove the
obstacle in front of the front
panel. Change the batteries.
Cannot record onto a USB
device.
The USB device has an incorrect
file format. The USB device has a
low write speed.
Format the USB device to NTFS,
or FAT32 file system. Choose
another high-quality USB device
with a higher write speed.
The box stopped receiving
channels after moving the
device to a different room.
By extending the lead from the
antenna, the signal quality has
dropped below functional level.
Use a link amplifier to
compensate for the signal loss
in the cabling. Contact a local
company for a precise antenna
system layout.
CZ | Digitální terestriální přijímač
Nevyhazujte elektrické spotřebiče jako netříděný komunální odpad, použijte sběrná místa tříděného
odpadu. Pro aktuální informace o sběrných místech kontaktujte místní úřady. Pokud jsou elektrické
spotřebiče uložené na skládkách odpadků, nebezpečné látky mohou prosakovat do podzemní vody a
dostat se do potravního řetězce a poškozovat vaše zdraví.