Emos J6012, Руководство пользователя, Страница: 7 / 104

7
5 – Previous
6 –
Play
7 – Pause: Pause playback
8 –
STOP:
Stop playback
9 – REC: Start recording
10 –
USB:
Access multimedia player menu
11 – SUB: Control subtitles on individual channels /
files (depending on availability)
12 – TTX: Teletext
13 –
AUDIO:
Select audio track/ audio settings
14 – EPG: Electronic programme guide
15 –
INFO:
Display information about the current
programme / show signal strength and quality
16 – Navigation buttons: Navigation in the menu /
Change channel / volume
17 – OK: Confirm selection
18 –
MENU:
Access the device's OSD menu
19 – Exit: Exit current menu
20 –
V+/-:
Change volume
21 – FAV: Show list of favourite channels
22 –
MUTE:
Mute audio
23 – CH+: Switch channel
24 –
Number (0~9):
Numeric keypad for direct
channel preset selection
25 –
TV/RADIO:
Switch between TV and RADIO
channels
26 –
RECALL:
Quick selection of Previous channel
Attention
In order to make full use of the USB port, the storage device connected to it must support USB 2.0. The required write
speed of the USB device is 9.0 MB/s or faster in order to achieve error-free, stable recording and playback. Slower
hard drives and flash drives may have issues with recording, resulting in image stuttering, or will not work at all.
Only drives with a single partition and an NTFS or FAT32 file system will work correctly. If the drive uses a different
file system, format the drive on a PC to the recommended file system before you connect it to the receiver. Heavily
fragmented or overfilled memory devices may also not work correctly or smoothly. External HDDs must have their
own power supply; the USB port built into the receiver is not able to supply sufficient voltage to power a portable
USB HDD. Do not under any circumstances disconnect the USB device from the receiver during recording or playback.
Doing so may damage the receiver or the flash drive and will also damage the data on the drive.
Installation and Assembly
Inserting Batteries into the Remote
Before turning the receiver on for the first time, place two AAA batteries into the remote in accordance with fig. 4.
Connecting the Receiver to the Signal Source
Connect the receiver to the signal source and other devices in accordance with fig. 5
Putting the Receiver into Operation
When putting the receiver into operation for the first time or when resetting the receiver to factory settings, an
installation guide will appear on the screen.
Based on your preferences, choose from the menu on fig. 6
1. Region
2. OSD Menu Language
3. Display Mode (factory preset is 720 p/50 Hz)
4. Aspect Mode
5. Antenna power (switch on only if you are using an active antenna powered directly from the receiver). Turning
this feature on will reduce the sensitivity of the input tuner. It is therefore recommended to primarily use
external power sources designed for powering antenna preamplifiers.
Confirm your selection with the OK button on the remote, after which the receiver will begin automatically searching
and saving all available channels.
Features and OSD Menu Controls
Installation (Fig. 7)
Auto Channels Scan
Automatic searching and storing of available TV channels.
a. Country – enter country of use
b. FTA only – limits search to free channels only
c. T2 signal only – limits search only to channels broadcast in DVB-T2
d. T2-Lite support
e. Search – starts tuning and saving channels after pressing OK
Manual Channels Scan
Manual search for TV channels. You can search channels by number or frequency. Once you have set your options,
press Search to begin searching. Enter the parameters of the channel and start the search by pressing OK
LCN (Logical Channel Numbering)
Choose whether you want to sort channels by their logical channel number. The default setting is "Off". This feature
does not currently function in the Czech Republic.
Channel Editing (Fig. 8)
TV Channel List
This option allows you to edit the list of channels by locking, deleting, skipping or moving channels and creating
lists of favourite channels. If you wish to display a channel preview, select it using the up/down navigation buttons
and press OK.