Emos EM-16LTE, Руководство пользователя

Страница: 2 / 12

2
GB | DVB-T/T2 outdoor antenna
Safety Instructions and Warnings
The product is designed to serve reliably for many years
if used properly.
• Read the user manual thoroughly before use.
• Do not place the product in locations prone to
vibration and shocks – these may cause damage.
• Do not place any open flame sources on the prod-
uct, e.g. a lit candle, etc.
• To clean the product, use a slightly moistened soft
cloth. Do not use solvents or cleaning agents - they
could scratch the plastic parts and cause corrosion
of the electric circuits.
• In the event of damage or defect of the product, do
not perform any repairs by yourself. Have it repaired
by the retailer you bought it from.
• This device is not intended for use by persons
(including children) whose physical, sensory or
mental disability or whose lack of experience or
knowledge prevents them from using it safely.
Such persons should be instructed in how to use
the device and should be supervised by a person
responsible for their safety.
Do not dispose with domestic waste. Use special
collection points for sorted waste. Contact local
authorities for information about collection
points. If the electronic devices would be disposed on
landfill, dangerous substances may reach groundwater
and subsequently food chain, where it could affect
human health.
Hereby, EMOS spol. s r. o. declares that the radio
equipment type J0679 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address:
http://shop.emos.cz/download-centrum/
Package Contents
Antenna
Antenna mount
Device Description
DVB-T/T2 antenna for outdoor use with low-noise
amplifier
Installation
• When installing the antenna, use a mount depend-
ing on the intended use (fig. 1–4)
• Connect the coaxial cable to the antenna.
• Connect the coaxial cable from the antenna to the
TV receiver or set-top box (fig. 5).
• Keep changing the placement of the antenna while
monitoring the signal quality on the connected TV.
• To achieve the best reception quality, place the
antenna onto an elevated spot.
Technical Specifications
Frequency range: UHF 470–790 MHz
Antenna gain: 14 dBi
RF output impedance: 75 Ω
1-4
6
DVB-T
TV/VIDEO
18
8
10
5