7
You can postpone (snooze) the alarm by 5 minutes by pressing the
button. After pressing, the
icons will start flashing.
Turn off the alarm by pressing
. After pressing, the
icons will stop flashing and
only
will remain on the screen. The alarm will activate again the next day.
Setting Altitude and Atmospheric Pressure
The station shows atmospheric pressure in hPa or inHg and keeps a history of pressure readings for
the last 12 hours.
To achieve more accurate calculation of pressure values, it is advised to manually set the altitude for the
place where the weather station is being used.
1. Short-press the
button three times
2. Press the
button for 3 seconds and use the arrows to set altitude between -90 m to +1,990 m
(10 m increments).
3. Pressing the
button switches between M/hpa and Ft/inHg units.
4. Short-press the
button to quit settings.
Setting Unit of Precipitation
1. Press the
button five times, then press the
button for 3 seconds.
2. Use the
and
arrows to set mm or inches as units.
3. Short-press the
button to quit settings.
Setting Unit of Wind Speed
1. Press the
button six times, then press the
button for 3 seconds.
2. Use the
and
arrows to set km/h or mph as units.
3. Short-press the
button to quit settings.
Setting Temperature Limits for Maximum and Minimum Temperature
Temperature limits can be set independently for up to 3 outdoor temperature sensors.
When minimum or maximum temperature limit is activated, the
(min) or
(max) icon will
appear on the screen and disappear after deactivation.
Temperature limit ranges
Outdoor
Indoor
Minimum
-30 °C to +10 °C
0 °C to 23 °C
Maximum
28 °C to +60 °C
26 °C to 50 °C
Resolution
0.5 °C
0.5 °C
While on the main screen, repeatedly press the
button to switch to sensor 1, 2 or 3 and proceed
for each sensor as follows.
1. Short-press the
button four times.
2. Press the
button for 3 seconds and set the minimum outdoor temperature.
3. Short-press the
button and activate (ON)/deactivate (OFF) the outdoor minimum temperature
alert.
4. Short-press the
button and set the minimum outdoor temperature.
5. Short-press the
button and activate (ON)/deactivate (OFF) the outdoor maximum temperature
alert.
6. Short-press the
button and set the minimum indoor temperature.
7. Short-press the
button and activate (ON)/deactivate (OFF) the indoor minimum temperature
alert.
8. Short-press the
button and set the minimum indoor temperature.
9. Short-press the
button and activate (ON)/deactivate (OFF) the indoor maximum temperature
alert.
When the set temperature limit is exceeded, an audio alarm will sound for 1 minute and the value will
begin flashing.
Содержание E6016
