NSW
78 Parramatta Rd
Camperdown NSW 2050
Tel 02 9519 3933
Fax 02 9550 1378
VIC
1206 Toorak Rd
Camberwell VIC 3124
Tel 03 9889 0427
Fax 03 9889 0715
QLD
1/1644 Ipswich Rd
Rocklea QLD 4106
Tel 07 3275 2183
Fax 07 3275 2196
SA, NT & TAS
3/26 The Parade West
Kent Town SA 5067
Tel 08 8363 5733
Fax 08 8363 5799
WA
63 Shepparton Rd
Victoria Park WA 6100
Tel 08 9361 4200
Fax 08 9361 4300
Email: [email protected] Web: www.protag.com.au, www.emona.com.au
EMONA INSTRUMENTS PTY LTD
"THE TECHNOLOGY HOUSE"
ABN 79 069 417 563
Bluetooth Barcode Scanner (New BCS-OPT)
QUICK START GUIDE
Battery Charging
Thank you for choosing our
Bluetooth Scanner
. The Bluetooth scanner uses built-in battery to
operate. Please charge your Bluetooth Scanner before you use it. This needs to be done via the USB
port of a PC or a USB adaptor
–
it cannot be charged via the port of a Seaward instrument
.
The scanner will turn itself OFF automatically if not used for 10 minutes to preserve battery. Before
operating the scanner and using it to connect to a PrimeTest unit, scanner needs to be switched ON.
Switching ON
1. Turn the Scanner ON, press and hold the
Clear/Function
key (
small
button) for a few
seconds until it beeps and flashes blue.
2. It is now discoverable to your tester. You can now use the scanner or search for initial setup
from a PrimeTest unit.
PAT Tester - Scanner Pairing
NOTE: If Barcode Scanner is already paired with the tester, you will
not
need to perform the following.
PrimeTest ELITE
1. From the Home
screen, press the Menu
key icon
.
2. Select number 3) Bluetooth icon
3. Switch on the Scanner you wish to pair (see
above).
4. Press the Search icon
to start search
5. Select the barcode from the
Barcode
field
and look for device
named “
OPN2006-
…”
6. Use the arrow keys: right and left to select.
7. Press Save
to save changes and return.
PrimeTest 300
1. Turn the PrimeTest on and select
Menu
Configuration
Bluetooth Favorites
2. Highlight the
Barcode
field and press
Setup.
3. Switch the Scanner ON.
4. Press
Search
to scan for local Bluetooth
devices.
5. Select the printer in the
New
field (look for
device named
“OPN2006-….”
).
6. Press
Add New.
7. Press
OK
to accept the new printer setting then
press
OK
again to save the new Bluetooth
configuration.
