NSW
78 Parramatta Rd
Camperdown NSW 2050
Tel 02 9519 3933
Fax 02 9550 1378
VIC
1206 Toorak Rd
Camberwell VIC 3124
Tel 03 9889 0427
Fax 03 9889 0715
QLD
1/1644 Ipswich Rd
Rocklea QLD 4106
Tel 07 3275 2183
Fax 07 3275 2196
SA, NT & TAS
3/26 The Parade West
Kent Town SA 5067
Tel 08 8363 5733
Fax 08 8363 5799
WA
63 Shepparton Rd
Victoria Park WA 6100
Tel 08 9361 4200
Fax 08 9361 4300
Email: [email protected] Web: www.protag.com.au, www.emona.com.au
Using the Scanner
InstalTest XC
1.
Switch the scanner ON by pressing “Power”
key (small button) until scanner flashes blue.
2.
On the IT XC, press “Memory Organizer”
select a work space.
3. The Bluetooth Icon should now appear at the
top right of the screen. Wait for the red cross
to disappear, which indicates the scanner is
connected to the tester.
4. You can now scan the barcodes. For new
barcodes, you will be asked if you would like
to add
a new ‘element’ to the list. Press Yes,
choose the element type, and then press
Add. If you re-scan an already created
element, the element will be automatically
highlighted.
PrimeTest 300
1. Switch the scanner ON by pressing
“Power”
key (small button) until scanner flashes blue.
2. On the PrimeTest 300, press
“Menu”
“Auto
Mode
”. PrimeTest will now attempt to
connect to the scanner.
3. When connection is made, the blue LED on
the scanner will now flash once every 3
seconds instead of every 1 second. Also, the
Bluetooth icon will appear on the PrimeTest
300 screen.
4. Press the
“Trigger” (large button) to scan a
barcode. The scanner will beep when it
detects a good barcode.
PrimeTest Elite
1. Switch the scanner ON by pressing
“Power” key (small button) until scanner flashes blue.
2. On the PrimeTest Elite, enter the PAT testing page.
3. When connection is made, the scanner icon will appear on the PrimeTest Elite screen if there is a
cross through the barcode symbol this indicates that the scanner is not connected.
4.
Press the “Trigger” (large button) to scan a barcode. The scanner will beep when it detects a good
barcode.