1. When you plug in the device the red light of the power button
will be on,
indicating the energy supply
2. Touch the power button
for 2 seconds to activate the device. All buttons of the
panel will light up. The red light of the power button will twinkle, indicating that the
Bluetooth®-Function is active and searching for Bluetooth®-Signals of connectable
devices.
3. The Remo1 Bluetooth® device will show up with the name eMoMo in the settings of
your external device. Please select eMoMo to establish a connection and enter the
Code: 0000.
Once the connection is successful, the power button
will light up in blue and you
will hear a confirmation sound.
4. Touch the power button
once to play or pause the audio file. Alternatively you
can also use the controls of your external device.
5. Touch the power button
again for 2 seconds to turn off the device.
Frequently Asked Questions
Technical Speci
fi
cations
9
GB
Basic Operations
Problem
Possible cause and solution / maintenance
No Power or does
not activate
The AC adaptor is not plugged into a socket or a power supply jack
properly. Please check the cable and power adaptor.
No Sound
The volume setting is on minimum. Please turn up the volume on the
panel and/or your external device.
Please check, if the cables are connected correctly between the
elements.
If a speaker unit has a malfunction, it will have to be replaced by an
authorized technician
The device does
not respond
The external device is not connected correctly.
The software is crashed.
Please switch of the power, wait a few seconds to soft reset the
device and retry.
Bluetooth® can not
connect
Please switch off Bluetooth® of all connected external devices and
retry. Only one external device can be connected at a time.
Please wait a few seconds or restart Remo1.
Do not connect the devices out of range and/or behind walls or
corners. Please note the working range of 8 meters!
You entered the wrong code during the connection process. The code
for eMoMo is 0000
Input
100 V ~ 240 V
Output
12 V = 2 A
Rated Power
25 W
Frequency Response
40 Hz
–
22 kHz
Signal-to-Noise Ratio
> 65 db
Bluetooth®-Edition
2.0+EDR
