9
4.3, the Device will automatically calculate the
number of applications needed to cover the whole
area.
At the end of first application the user must move the
Device to the adjacent area and press OK to start the
next application, repeating the action until the end of
the whole treatment. In order to limit consumption of
applications it is recommended to pay attention not to
overlap the treated areas.
NOTE
.
The Device will start only if the battery charge
is enough to terminate the whole treatment.
Otherwise to the display will appear the signal of
insufficient charge.
4.3
Operating instructions
1.
Open the case and extract the Device and the
accessory screen for visual comfort.
2.
Clean the Device with sterile gauze soaked in
ethylic alcohol at 50%.
3.
Place the accessory screen on the Optical Head
near to the front frame as shown in Fig. 6.
4.
Set the Optical Head in the best position for the
use pulling slightly the head, rotating and
releasing it, as described in the image sequence
in Fig. 5.
5.
Press the ON/OFF Button (Fig. 2) to switch on the Device.
The “ready to use” position
is with the Optical Head aimed to the lesion and the touch screen always in sight
facing the operator (see Fig. 7). It is recommended to use the rotation of the Optical Head to obtain the best
positioning possible avoiding rotations of Device’s body. Maximum Optical Head rotation allowed 180°.
The complete rotation is prevented by a mechanical stop.
FIGURA 5 – Optical Head orientation procedure
Figure 4: Example of calculation of the are
to treat and multiple applications