background image

ASSEMBLY

 

INSTRUCTIONS

 

 

 

For

 

Seat

 

Post

 

and

 

Pedals

 

Pull the seat clamp handle away from the seat post and slide the seat up 
or down to adjust the height. Move the clamp handle inward toward the

 

seat post so that the seat post can be held securely by the clamp. Make sure the seat is 

clamped properly so that you can

t twist it out of alignment.

 

 

If necessary, tighten the clamp by twisting the clamp handle clockwise while in the 
unclamped position. Then, fold the handle in toward the seat post. This should 
require a fair amount of force to ensure the seat post is held tight. If necessary, the 

clamp can be further tightened with a 5 mm allen wrench while in the clamped 
position.  

 

WARNING:

 

Make

 

sure

 

the

 

seat

 

is

 

not

 

set

 

with

 

the

 

vertical

 

maximum

 

height

 

marks

 

above

 

the

 

clamp.

 

 

 

Using the 15 mm wrench to attach and 

tighten the pedals. PLEASE

 

NOTE 

– 

The 

pedals are marked 

L

” 

for Left and 

R

” 

for 

Right. The left pedal is attached by turning it 

counterclockwise and the right pedal is 
tightened by turning it clockwise. 

 

Make sure the pedals are properly 

attached to the crank arms to prevent 
stripping.

 

TORQUE

 

SPECIFICATIONS

 

Содержание E-mini B






















Отзывы: