13 |
P a g e
Seat
To open the seat, use the
keyhole on the side of the
bike (shown in the picture
above). Turn right to unlock
the seat.
Circuit Breaker
The circuit breaker controls
the power running through the
bike from the battery. When
the switch is flicked on,
power flows throughout the
bike and all functions work.
When the switch is flicked
off, power does NOT flow
through the bike, and none of
the electrical aspects will
work on the bike.
WARNING!
FOR LEAD ACID
BATTERY:
In the winter time, fully
charge the bike and turn the
circuit breaker off for
proper battery
maintenance. Turn it back
on once a month and fully
charge the battery to ensure
maximum battery life.
Don’t leave it uncharged for
extended periods of time!
FOR LITHIUM
BATTERY:
Charging the e-bike should
take a maximum of 6 hours.
Do not charge the e-bike for
more than 8 hours.
Overcharging will overheat
the battery, causing damage
to the battery. During long
periods of inactivity, make
sure that there is more than
25% power in the battery,
then remove the battery
from the bike.