4.8 Entering to the Programming Mode, Changing and Saving Parameters
Main Operation Screen
SET
i
SET
SET
SET
°C
SET
SET
Programming Mode
Entering Screen
SET
SET
31
When SET button is pressed
for 5 seconds, “PR” led starts
to blink. If programming mode
entering password is different
from 0, programming mode
entering screen
is
observed.
5 secs
Note-1:
If programming
mode accessing
password is 0,
hysteresis screen
is observed instead of
Programming screen
accessing password
Press increment
button for accessing
to the password
entering screen.
Password Entering Screen
Press SET/OK button for
accessing to the parameters.
Password Entering Screen
Enter programming mode
accessing password with
increment and decrement buttons.
Note-2:
Parameters can be observed by pressing SET/OK button in password entering
screen without entering the programming mode entering password. But parameters can
not be changed.
Hysteresis Parameter
Programming Screen
Hysteresis
Change the value with
increment and decrement
buttons.
Press increment button for accessing to the
parameter value. Press set button for
accessing to the next parameter.
Programming Screen
Hysteresis
Hysteresis Parameter
Press set button for accessing to
the next parameter.
If no operation is performed in programming mode for 20 seconds, device turns to
main operation screen automatically.
Press set button for saving
the parameter.