4.9 Entering to the Programming Mode, Changing and Saving Parameters
i
Main Operation Screen
Programming Mode
Entering Screen
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
SET
°C
SV
PR
28
If no operation is performed for 20 seconds in programming mode, device turns to
main operation screen automatically.
M
ax
M
in
M
ax
M
in
M
ax
M
in
M
ax
M
in
M
ax
M
in
M
ax
M
in
M
ax
M
in
M
ax
M
in
5 secs.
When SET button is pressed
for 5 seconds, “PR” led starts
to blink. If programming mode
entering password is different
from 0, programming mode
entering screen will be
observed.
Note-1:
If programming
mode accessing
password is 0,
hysteresis screen
is observed instead of
programming screen
accessing password
Press increment
button for accessing
to the password
entering screen.
Password Entering Screen
Press SET/OK button for
accessing to the parameters.
Password Entering Screen
Enter programming mode
accessing password with
increment and decrement buttons.
Note-2:
Parameters can be observed by pressing SET/OK button in password entering
screen without entering the programming mode entering password. But parameters can
not be changed.
Hysteresis Parameter
Change the value with
increment and decrement
buttons.
Press increment button for accessing to the
parameter value. Press set button for
accessing to the next parameter.
Hysteresis Value
Programming Screen
Press set button for accessing to
the next parameter.
Press set button for saving
the parameter.
Hysteresis Parameter
Hysteresis Value
Programming Screen