4.6 Entering To The Programming Mode, Changing and Saving Parameter
i
24
If no operation is performed in Programming mode for 20 seconds, device turns to
main operation screen automatically
Programming Screen
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
SET
°C
SV
P
When SET button is pressed
for 5 seconds, “P” led starts to
blink. If programming mode
entering password is different
from 0, programming mode
entering screen will be
observed.
Note-1:
If programming
mode accessing
password is 0,
hysteresis screen
is observed instead of
programming screen
accessing password
Programming Mode
Entering Screen
Press increment
button for accessing
to the password
Password Entering
Password Entering
Enter programming mode accessing
password with increment and decrement
Press SET/OK button for
accessing to the parameters
Note-2:
Parameters can be observed by pressing SET/OK button in password entering
screen without entering the programming mode entering password. But parameters can
not be changed.
Hysteresis Parameter
Change the parameter with
increment and decrement buttons
Hysteresis Parameter Value
Parameter is accessed by pressing
increment button. If set button is pressed,
next parameter is shown.
Hysteresis Parameter Value
Press Set button for saving
the parameter value
Hysteresis Parameter
Press Set button for accessing
to the next parameter
Main Operation Screen
5 secs
Programming Screen