background image

 

 

 

1. Description: 

 

 

EMITOR SATLOOK Mark IV FTA

 is a measuring-instrument developed and 

manufactured in Sweden for exact alignment and adjustment of satellite-dishes.  
The instrument is provided with a 4.5" TFT-color monitor which either shows Digital FTA 
/ Analog TV-channel or the frequency spectrum 920-2150 MHz (normal or expanded 
mode). 

 

It's very easy to detect satellite signals in the spectral-mode and the spectrum can be 
expanded for correct adjustment of the polarisation. 
 
Channel search is done with a large knob on the side of the instrument and by help of the 
two digit LED-display on the front-panel. 
Switching between spectrum/Digital/Analogue-mode are made easy by pushing a button. 
 
Soundfrequencies between 5.5 – 8.5 MHz can be tuned in and listened to. 
 
The polarisation of the LNB is switchable with a 22 kHz-tone and/or  with 13V/18V. 
DiSEqC-accessories (like switches) can also be controlled. The instrument is protected 
from short-circuit when connecting the LNB. 
 
The main functions of  the Digital Free To Air receiver are controlled on the instrument´s 
key-pad but can also be fully controlled with the attached remote-control. 
 
Power to the instrument is supplied by a built in, rechargeable battery. 
The battery is recharged from the external battery charger or the car-adaptor. 
 
Even though the instrument has a lot of functions it is still very flexible and easy to use. 
SATLOOK Mark IV FTA weights only about 5,5kg incl. the battery and carrying-case. 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание SATLOOK Mark IV Free To Air






















Отзывы: