TB-6590
Page 2 of 5
© 2018 DESCO INDUSTRIES INC
Employee Owned
EMIT
- 3651 Walnut Avenue, Chino, CA 91710 • (909) 664-9980 • Website:
DescoEMIT.com
Features and Components
3. Connect the power adapter to the ionizer to turn it on.
When the unit is first turned on, it conducts a self-test.
The audible alarm will sound, and the status LED will
cycle through orange and green. The LED will remain
green during normal operation.
A. Ground Jack:
Insert the banana plug end of the included
ground cord to this jack. Connect the ring terminal end of the
cord to equipment ground.
B. 24VDC Power Jack:
Connect the power adapter here to
power the Mini ZVI 2.
C. Fan Speed Switch:
Slide the switch down to set the fan
speed to LOW. Slide the switch up to set the fan speed to
HIGH.
D. Balance Adjustment Potentiometer:
Turn the
potentiometer clockwise for positive adjustment. Turn the
potentiometer counter-clockwise for negative adjustment.
E. Status LED:
The LED will illuminate green when the
ionizer runs normally. It will illuminate orange and sound
the buzzer should the ionizer experience circuit failure or its
emitter pins become too dirty to operate effectively.
Installation
Place the unit at a desired location where that the airflow
will not be restricted. The Mini ZVI 2’s compact size and
mountable stand allow it to be installed in confined spaces
such as enviornment chambers and automated machinery.
Connect the ground cord to the ionizer’s ground jack. Attach
the ring terminal end of the ground cord to a ground point.
The face plate screw of a grounded AC wall outlet may
provide a convenient connection point.
Operation
1. Set the fan speed switch to the LOW or HIGH position.
Higher airflow will result in faster neutralization rates.
2. Position the ionizer so that maximum airflow is directed
towards the items or area to be neutralized.
Figure 3. Mini Zero Volt Ionizer 2 features and
components
B
A
C
D
E
Figure 4. Using the Mini Zero Volt Ionizer 2 at a
workstation.
Figure 5. Using the Mini Zero Volt Ionizer 2 inside
automated machinery.
