4
|
ENGLISH
Note: Make sure you must safely remove the EW7033 from your computer.
Click ‘Safely remove hardware’ icon on the taskbar and you will see al list of
devices. Click the device you want to remove.
4.1 Preparing the hard disk using Windows XP/Vista
1.
Right click the ‘My Computer’ icon.
2.
Click ‘Manage’.
3.
Select the option ‘Disk Management’ from the left side of the screen.
4.
Right click the new hard disk and choose ‘Initialize’.
5.
Click ‘OK’.
6.
Right click the new hard disk.
7.
Click ‘New Partition’.
8.
Click ‘Next’.
9.
Click ‘Next’.
10. Click ‘Next’.
11. Choose the desired partition format (Note: when using FAT32 the partition size is
limited to 32GB).
12. Click ‘Next’.
13. Select the drive letter you wish to assign to this partition.
14. Click ‘Next’.
15. Select the desired file system: FAT32 or NTFS.
Note! If you only use the hard disk on Windows XP or Vista systems we recommend
the usage of the NTFS file system. However, If you are also using older Windows
systems, we recommend the usage of FAT32.
16. Enter a name for the new partition in the field 'Volume label'.
17. Enable the checkbox near ‘Quick format’.
18. Click ‘Next’.
19. Click ‘Finish’.
20. The hard disk is now ready to be used.
4.2 Preparing the hard disk using Windows 7
1.
Go to ‘Start’.
2.
Select ‘Control Panel’.
3.
Select ‘Administrative Tools’.
4.
Select ‘Computer Management’.
5.
Select ‘Disk Management’ at ‘Storage’.
6.
Right-click the new hard disk and click ‘New Simple Volume’.
