Eminent EM8676, Руководство пользователя

Страница: 4 / 7

4 |
ENGLISH
5.0 Use the siren as standalone alarm system
5.1 Connect wireless accessories
Connect the siren to the mains.
Press the connect button (0,5 seconds). The Siren will beep once. 3 seconds later it
will give another beep and the strobe light flashes. The siren is now ready to connect
to the wireless accessories.
Trigger the wireless accessory you would like to add to the siren. After one beep from
the siren the accessory is connected successfully.
Repeat above steps to add more accessories.
Note : The siren supports up to 40 wireless accessories.
Now test the connection between the alarm system and accessories.
Press the arm button on the remote control. Trigger one of the accessories and
check if the siren will hoot. If the siren is not responding please repeat above steps.
5.2 Entry and exit delay time
You can set the entry and exit delay time for the wireless accessories.
15 seconds delay time : press the connect button twice
30 seconds delay time : press the connect button 3 times
No delay time : press the connect button 4 times
6.0 Reset the siren
Keep the connect button pressed for 6 seconds until one beep is heard.
At the same time the LED indicator flashes twice.
All connected accessories and connected alarm systems are now disconnected.
7.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.