Eminent EM7100, Руководство пользователя

Страница: 6 / 10

6 |
ENGLISH
3.1 Installing the receiver unit using HDMI
1. Place the receiver unit near your television.
2. Connect the HDMI cable to the ‘HDMI-OUT’ port of the receiver unit.
3. Connect the other side of the HDMI cable to the HDMI connection of your
television.
4. Place the receiver unit in the supplied standard for optimal stability.
5. Now connect the power supply of both the sender and receiver unit to a wall
outlet and to the ‘DC’ connection of the sender and receiver unit.
3.2 Installing the receiver unit using component
1. Place the receiver unit near your television.
2. Connect the component cables to the ‘COMPONENT-OUT’ connection of the
receiver unit. Make sure the colors of the component cables do match the colors
of the ‘COMPONENT-OUT’ connection of the receiver unit.
3. Connect the other side of the component cables to the corresponding component
connections of your television.
4. Place the receiver unit in the supplied standard for optimal stability.
5. Now connect the power supply of both the sender and receiver unit to a wall
outlet and to the ‘DC’ connection of the sender and receiver unit.
3.3 Installing the receiver unit using SCART or composite
1. Place the receiver unit near your television.
2. Connect the SCART cable (or composite to SCART) to the ‘AV-OUT’ connection
of the receiver unit.
3. Connect the other side of the SCART cable or composite cable to the
corresponding connection of your television.
4. Place the receiver unit in the supplied standard for optimal stability.
5. Now connect the power supply of both the sender and receiver unit to a wall
outlet and to the ‘DC’ connection of the sender and receiver unit.
4.0 Using the EM7100
The EM7100 has now been setup. You can now enjoy the full potential of wireless Full
HD streaming!
1.
Make sure all devices have been started. Bear in mind that starting the EM7100
can take up to one and a halve minute.
2. Also, make sure you have chosen the right video channel on your television. If
correct, the screen or main menu of the media player or media device will be
shown.
3. If you do not see the screen or main menu of the media player or media device,
then use the supplied remote control to ‘switch’ to the correct video-mode.