22 |
ENGLISH
Suggestion:
Set PC1 to ‘Max Limit’ and set a maximum of 5000 Kbit download
and 512 Kbit upload.
Problem:
During online play with PC, PS3 or Xbox360 the screen freezes or
strange artifacts appear on screen. This is so called ‘lag’, caused
by others computers which are using the internet connection
intensively.
Suggestion:
Set PC, PS3 or Xbox360 with ‘Min.Guarantee’. Use the values
3000 Kbit download and 640Kbit upload.
Hint: The QoS rules are handled by the router from the top of the list to the bottom of
the list.
9.0 Frequently asked questions
Q:
I receive the message ‘The IP address of the network adapter is incorrect’. What
can I do?
A:
This message appears when the computer did not receive a correct IP address
from the router. Make sure all cables are correctly connected. If necessary, reset
the EM4542 and try again. It is recommended that you configure the router using
a cabled connection (not wireless). After the cabled connection is working
properly you can setup the wireless connection as explained in this manual.
Q:
The manual mentions ‘URL filtering’. Is it possible to block certain sites even if I
do not know the complete name of the site(s)?
A: This is possible. Enter a part of the site name. For instance, you could enter
‘adult’ and save these settings. Any site which address contains the word ‘adult’
can then not be visited. This also goes for sites which use this word in a normal
fashion.
Q:
I have configured the router. Everything seems fine but I cannot gain access to
the Internet. My provider is UPC Chelllo.
A:
Make sure you have selected the correct MAC address during configuration. If
you have chosen the wrong MAC address, there is not connection to the Internet.
Q:
I would like to know the MAC address of my network adapter for use with my
Chello connection. How can I obtain this address?
A: To obtain the MAC address of your network adapter you need to follow the steps
below:
Steps for Windows XP/2000 and Windows Vista:
1.
Click ‘Start’.
2.
Go to ‘Run’.
3.
Enter ‘cmd’
4.
Press the enter key or click ‘OK’.