4
|
ENGLISH
The EM3984 and the EM3988 are equipped with an LCD display instead of LEDs. The
display shows the following information:
(1) The status of the battery
(2) Power usage in percent
(3) Output voltage
(4) Input voltage
(5) Alarm indication
Follow the instructions below to connect the UPS:
1.
Connect the serial cable to the computer and to the UPS.
2.
Plug the UPS power cable into a wall outlet.
3.
Connect one end of the supplied power cable to the back of the UPS. Connect
the other end to the power supply of your computer.
4.
If you wish, you can use an additional patch cable to connect the power supply of
your monitor to the UPS.
5.
Optionally, to protect your telephone line from the effects of a lightning strike, you
can connect the telephone cable from the wall outlet to one of the ‘TEL/FAX’
ports and your telephone, fax or modem to the other ‘TEL/FAX’ port.
6.
Press the on/off button on the front of the UPS to turn it on. You will hear a short
beep.
2.0 UPSmart 2000R software
The EM3980/EM3982 is supplied with UPSmart 2000R software. This software
package enables you to view the status of the UPS and change multiple settings.
During a long lasting power failure the software will correctly shut down your computer
before the battery of the UPS is drained
2.1 Installing the software
1.
Insert the CD-ROM into the CD-ROM drive or DVD drive of your computer.
2.
The Setup menu of the software will automatically appear.
3.
Click ‘Next’.
4.
You will now be asked to enter a username, company name and serial number.
Enter this information. The serial number can be found on the sleeve of the CD-
ROM.
5.
Click ‘Next’.
6.
Select the installation path and click ‘Next’.
7.
Enter an installation folder name and click ‘Next’.
8.
Click ‘Next’.
Содержание EM3980
Страница 1: ...EM398x R1 UPS 600 1000 1600VA...
