8
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to a threaded 3/4(inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear. This precaution is needed to avoid the risk of
the water inlet to be blocked and damage the appliance.
NOTE
:
Please close the
faucet
after using.
Position The Appliance
Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the right
or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling,
the height of the dishwasher may be altered via
adjustment of the screwing level of the feet.
In any case, the appliance should not be inclined
more than 2
°
.
NOTE
:
Only apply to the free standing dishwasher.
The product warranty does not cover leaks from hose connections.
Even if the inlet hose has been connected to the dishwasher in production the
connection point into the dishwasher must be checked. Turn on the water at the
tap before sliding the dishwasher into place to check there are no leaks at
either end of the inlet hose. The correct washers must be used for all hose
connections.The product warranty does not cover leaks from hose
connections.
FLOOD WARNING - hose connection checks
