ESD-6300/ESD-1862/ESD-1704 User’s Manual
9
Settings Menu
Volume (1)
Push the encoder knob to access the settings menu. The first setting is volume control. Turn the knob and adjust the
volume as you need. Press the knob for the next step. If the knob has not been pressed or turned the display will return
to the input menu in a few seconds.
Volume:
000 MUTE
Channel Mode (2)
Turn the knob and select the required mode - mono, stereo, left, right or swapped. Press the knob for the next step.
If the knob has not been pressed or turned the display will return to the input menu in a few seconds. Only stereo and
mono mode if AUX input is selected.
Channel Mode:
Stereo [ST]
Phase Mode (3)
Turn the knob and select the required mode - normal, inverted left, inverted right or inverted both. If the knob has not
been pressed or turned the display will return to the input menu in a few seconds. The function is not available if AUX
input is selected.
Phase Mode:
Normal [NP]
Digital Filter Roll-Off (4)
Turn the knob and select the required DF mode - sharp or slow. Press the knob for the next step. If the knob has not
been pressed or turned the display will return to the input menu in a few seconds. The function is not available if AUX
input is selected.
DF Roll-Off:
Sharp [SH]
Backlit (6)
Turn the knob and select constant LCD backlit or auto off backlit mode (around 1 min). Press the knob for the next
step. If the knob has not been pressed or turned the display will return to the input menu in a few seconds. To turn on
the backlit in auto off mode press the knob. The backlit will turn on. Press the knob to enter the settings. By turning the
knob the backlit will turn on and the next or previous input will be selected depending on the rotation direction.
Backlit:
ON
Aux Level (7)
Aux input level adjust
Press the knob for the next step.
Available only if AUX is selected.
±10dB in 1dB steps. Turn the knob to adjust input level
AUX dBL -0.5
+00 dBR -0.5
Channel Mode:
Mono [MN]
Channel Mode:
Left Only [LO]
Channel Mode:
Right Only [RO]
Channel Mode:
Swap [SW]
Phase Mode:
Inv. Both [IB]
Phase Mode:
Inv. Left [IL]
Phase Mode:
Inv. Right [IR]
DF Roll-Off:
Slow [SL]
Backlit:
Auto OFF
Volume:
100 MAX
ADAT Channel (5)
Turn the knob and select the required ADAT channel pair. Press the knob for the next step. If the knob has not
been pressed or turned the display will return to the input menu in a few seconds. The function is available only if ADAT
input is selected.
ADAT Channel:
1>L 2>R
ADAT Channel:
3>L 4>R
ADAT Channel:
5>L 6>R
ADAT Channel:
7>L 8>R