Emico Noah Actuation NA 006, Руководство пользователя, Страница: 23 / 35

9
23
12-2-3
Pull the lever and turn the handwheel counter clockwise
to rotate the actuator to the full open position.
Also, open the valve at this time.
12-2-4
Apply a thin coat of grease to the drive bushing
and install in the ACTUATOR. Apply a thin coat of
grease to the valve stem . coupling and then mount
the ACTUATOR to the valve and mounting kit as shown.
12-2-5
Fasten the ACTUATOR, valve and mounting kit
together using stud bolts and nuts or hex bolts.
Firmly tighten the assembly together and confirm
that there are no gaps between the conponents.
12-2-6
confirm that the ball valve rotates open
while you manually engage the manual
override and rotate the handwheel counter
clockwise.
(Refer to section 15. Limit switch setting)
12-2-7
Adjust the length of the mechanical limit stop.
(Refer to section 17. Mechanical limit stop setting)
̷
̷
Bolt
̷
Open/Close
Limit Cam
Switch
Stopper
Bolt
̷
̷
.PUJPOJODPOUSPMT
ξ