Emhart POP PB2500, Руководство пользователя

Страница: 16 / 21

16
English
29. Cleaning
CHARGER CLEANING INSTRUCTIONS
30. Optional Accessories
Consult your dealer for further information on the
appropriate accessories.
Maintenance Frequency
Cleaning the Nose Housing & Jaw Case
(fig. 4 & 5)
• Loosen the nose housing nut (C). Remove
the nose housing (B).
• Press the jaw case lock (W) and
loosen the jaw guide (R). Release
the jaw case lock (W).
• Remove the jaws (S) and the jaw
pusher (T).
• Remove the spring (U).
• Clean the inside of the nose housing (B)
using a dry cloth.
• Clean the clamping jaws (S) and the jaw
pusher (T) using a dry cloth. If necesary,
replace the jaws (S) and the jaw
pusher (T).
• Clean the pulling head (V) using a dry
cloth.
• Apply grease to the inside of the jaw guide
(R) where the jaws (S) make contact. A
Molybdenum Disulfide based grease is
recommended.
• Mount the spring (U).
• Mount the jaw pusher (T) and the
jaws (S)
• Press the jaw case lock (W) and
tighten the jaw guide (R). Release
the jaw case lock (W).
• Mount the nose housing (B). Tighten the
nose housing nut (C).
WARNING: To reduce the risk
of serious personal injury, disconnect
battery pack before making any
adjustments or removing/installing
attachments or accessories.
WARNING:
Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
WARNING:
Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
WARNING:
Since accessories, other
than those offered by POP
®
have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only POP
®
recommended
accessories should be used with this
product.
Item Frequency
Clean & lubricate Nose Houseing & Jaw Case 5,000 rivets
Clean & grease Ball Screw and Thrust Bearing 50,000 rivets*
*Recommend contacting authorized service center