EMH metering NXT4, Инструкция по эксплуатации

Страница: 9 / 24

9
6. The
additional cursor field
displays the operating states for
the meter. The arrows indicate whether any manipulation or an
installation error was registered or if the power threshold was
exceeded.
MAN The cursor is active where any manipulation of the terminal
cover, meter cover or any magnetic influence is registered.
PWR1 The cursor is active if the first defined power threshold in
the meter was exceeded.
PWR2 The cursor is active if the second defined power threshold
in the meter was exceeded.
7. The standard cursor field displays the operating states for the
meter. The arrows indicate which tariff and maximum meter are
active, and how the meter is being controlled (clock or ripple control
receiver).
T1 - T4
Tariff information for energy. All activatable tariff indexes
are denoted on the name plate.
M1 - M4 Tariff information for power. All activatable power indexes
are denoted on the name plate.
TST The cursor is displayed if test mode is activated.
RL The cursor flashes on and off as long as a resetting
lock is active.
CLOCK
The cursor is active when the internal device clock
actuates the tariff meter.
SET
The cursor is active when the meter is in the Set mode.
8. The value area displays the measured values.
9. The code area defines the measured values according to the OBIS
key. The display can show all six value groups.