- 77 -
Preparing for use
1.
Switch both units on.
2.
Adjust the appropriate volume level by pressing the key "POWER/VOL".
3.
Position both units at desired places.
4.
Diodes on the parent unit show the volume level which the baby unit
receives.
5.
If a noise is detected within 30 seconds after the last event, the parent
unit will also start to vibrate for 5 seconds.
Installation of the belt of the parent unit to the wrist
Insert the belt according to arrows in the picture. You can fasten the unit to the
wrist as the watch or to the trouser’s belt. If you use the unit in the charging
stand, it is not necessary to insert the belt into the unit.
Basic operations (End)