Diagram #3
One Pickup
One Volume
Diagram #4
One Pickup
One Volume
One Tone
Diagram #1
Diagram #2
General Notes:
Every attempt has been made to make this a solderless installation.
There are some instances where this is not possible;
1) If your instrument uses the long panel output jack, soldering will be required.
Installation Instructions:
EMG Models: PVA2-HZ / PVA5-HZ
PVA2-HZ / PVA5-HZ INSTRUCTIONS Page 2
BLACK
WHITE
MASTER
VOLUME
FROM PICKUP
MASTER
TONE
OUTPUT CABLE
OUTPUT CABLE
MASTER
VOLUME
FROM PICKUP
E / A SIDE
D / G SIDE
Installation
1) Diagram #1 shows how to install the pickup cable onto the back of the pickup.
It’s a good idea to keep any extra length of cable in the pickup cavity if possible.
Route the cable to the control cavity.
Diagram #2 shows the color code of the cables, be sure to pay attention to the
colors when you are installing the pickup and interconnect cables.
2) Diagram #3 shows an installation that has just a volume control,
while diagram #4 shows the typical P Style installation with a
master volume and master tone control.
3) If your instrument has a selection switch or the wiring is different,
vist our website; emgpickups.com for more diagrams and video installations.
BLACK WIRE INCLUDED
WITH CONNECTOR FOR
BRIDGE GROUND
BLACK WIRE INCLUDED
WITH CONNECTOR FOR
BRIDGE GROUND
VOLUME
250K
OUTPUT
S
T
VOLUME
250K
B159A
OUTPUT
S
T
250K
TONE
EMG
