EMG EMG Series Скачать руководство пользователя страница 3

Bottom View

Red

Black

White

Black

Solder Pickup Braids to pot casings

2 Volume (Independent)
2  Tone
w/ Gibson Style Toggle Switch

Red wires from Pickups

Volume

Pickup Output Cable

Solder Fingerboard Pickup "Hot" lead to this lug

.1uf

104

Tone

Volume

Pickup Output Cable

Solder Bridge Pickup "Hot" lead to this lug

.1uf

104

Tone

Содержание EMG Series

Страница 1: ...ccessories such as the SPC RPC EXG AB PA 2 and Pi 2 2 Use an Alkaline or Lithium battery for longest life 3 The controls included with EMG Systems are 25K Ohm Audio Taper This value of control is required for the system to work correctly 4 When installing EMG Active Pickups DO NOT connect the bridge ground wire This wire is usually soldered to a volume or tone control casing and goes to the bridge...

Страница 2: ...ures for Models EMG Models EMG H HA 58 60 60A 81 85 1 Disconnect the existing pickup from its volume and tone control 2 Disconnect any existing selection switch wire s from its volume and tone control 3 Remove the pickup and the volume and tone control Place the EMG volume and tone control in the instrument Mount the pickup in the mounting ring and install the quick connect cable as shown in the d...

Страница 3: ...pot casings 2 Volume Independent 2 Tone w Gibson Style Toggle Switch Red wires from Pickups Volume Pickup Output Cable Solder Fingerboard Pickup Hot lead to this lug 1uf 104 Tone Volume Pickup Output Cable Solder Bridge Pickup Hot lead to this lug 1uf 104 Tone ...

Страница 4: ...s Volume Pickup Output Cable Solder Fingerboard Pickup Hot lead to this lug 1uf 104 Tone Volume Pickup Output Cable Solder Bridge Pickup Hot lead to this lug 1uf 104 Tone Tone Tone Volume Volume 1 1 RED Bottom View Bridge pickup cable Gibson Les Paul April 1975 and later Cable from 3 way switch Finger Board pickup cable RED FROM PICKUPS BLACK BLACK Black wire Green wire shrink tubing GREEN WHITE B...

Отзывы: