0230-XXXX
PO BOX 4394
SANTA ROSA, CA
95402 USA
P (707) 525-9941
F (707) 575-7046
EMGPICKUPS.COM
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
INSTALLATION INFORMATION
EMG MODEL:
EMG-ACB
BARREL
W B R
ALSO INCLUDED :
(2 ea.) CR2032 LITHIUM BATTERIES
1/16 ALLEN HEX WRENCH
9/64 ALLEN HEX WRENCH
General Operation
The EMG-ACB Barrel Banjo Pickup is an alternative to our more sophisticated banjo pickup the ACB. This pickup is the more traditional banjo
pickup players have been used to for some time. By placing a small shim of steel (.004 thick) under the center bridge post the pickup senses
the movement of the steel and produces a signal. Alternately, the steel can be placed pretty much anywhere inside the banjo as long the pickup
can be placed over the steel shim. The pickup is dual-coil and uses a battery operated pre-amp to help shape the response of the signal as well
as reduce noise.
No Soldering required:
The installation is completely solderless so anyone can do it.
EMG
BANJO
BARREL
SPECIFICATIONS:
MODEL:
EMG-ACB BARREL
Logo Color
Silver
Magnet
Type
Ndym/Steel
Resonant Frequency (KHz)
6.00
Output Voltage
*P.D.
Output Noise (60 Hz)
-120
Output Impedance (Kohm)
2.00
Current @6V (Microamps)
650
Battery Life (Hours)
500
Maximum Supply (Volts DC)
18
*P.D. (Placement Dependent)
.820 (20.8)
.650 (16.5)
INCLUDED:
PICKUP
STEEL SHIMS
PICKUP MOUNTING
PICKUP ADJUSTMENT
SPACERS
PREAMP/BATTERY
BOARD
VOLUME / OUTPUT JACK
CABLES
