10
11
4
5
Open your computing devices’ browser
(Mozilla, Safari, Chrome, Internet Explorer etc.).
Type in address/url bar:
http://192.168.1.3
and hit enter.
Select your own Wi-Fi network from the list
and type its password.
If you cannot access above IP-address,
check that your computing device did not
disable itself from EMFIT QS and is perhaps
again connected to your own Wi-Fi. Problem
may also arise with desktop computer when
also LAN/ethernet cable is connected. To
solve possible problem, simply remove
LAN/ethernet cable temporarily.
8
http://192.168.1.3
http://192.168.1.3
Emfit
“Your network”
Detected Wireless Networks
Other Network…
Connect to Wi-Fi
…continued
6
Press enter and EMFIT QS will now try to
connect to your Wi-Fi network. Connecting
can take up to few minutes. You hear short
“beep” sounds and see the red led flashing.
Successful connection type 1
Device will emit high tone sounds. In about
1-3 minutes red light will stop flashing and
green light will start flashing.
Successful connection type 2
Device will emit high tone sounds. However
red light will not stop flashing. It flashes one
or two or three times between pauses.
9
You are done! Your device is now con-
nected and ready to track your sleep.
Sorry, you are not done yet! Please see
chapter Troubleshooting page 36 in the
Main Manual. This occurs usually in a cor-
porate Wi-Fi network.
Only red light remain flashing.
Red light starts flashing.
Green light will start flashing.
