Emfit L-0656 Скачать руководство пользователя страница 20

38

39

In the unlikely event that your product needs guarantee ser-
vice, please contact your dealer, distributor or manufacturer. 
To avoid any unnecessary inconvenience on your part, we rec-
ommend you read these instructions for use carefully before 
seeking guarantee service.

YOUR GUARANTEE

By this Guarantee, Emfit guarantees the product to be free 
from defects in materials and workmanship at the date of 
original purchase for a period of two (2) years from that date.

If within the guarantee period the product is determined to 
be defective (at the date of original purchase) due to improp-
er materials or workmanship, Emfit will, without charge for 
labour or parts, repair or (at Emfit’s discretion) replace the 
product or its defective parts subject to the terms and limi-
tations below. Emfit may replace defective products or parts 
with new or refurbished products or parts. All products and 
parts replaced become the property of Emfit.

TERMS

Guarantee services will be provided only if the original invoice 
or sales receipt (indicating the date of purchase, model name 
and dealer’s name) is presented with the defective product 
within the guarantee period. Emfit may refuse free-of-charge 
guarantee service if these documents are not presented or if 
they are incomplete or illegible. This Guarantee will not apply 
if the model name or serial number on the product has been 
altered, deleted, removed or made illegible.

This Guarantee does not cover transport costs and risks as-
sociated with transport of your product to and from Emfit.

This Guarantee does not cover:

a) periodic maintenance and repair or parts replacement due 
to wear and tear. Notice! Emfit bed sensor wears and tears 
significantly faster when installed on soft base like spring 
mattress.

b) consumables (components that are expected to require 
periodic replacement during the lifetime of a product such as 
non-rechargeable batteries)
c) damage or defects caused by use, operation or treatment 
of the product inconsistent with normal use
d) damage or changes to the product as a result of:
i. misuse, including:
treatment resulting in physical, cosmetic or surface damage 
or changes to the product
failure to install or use the product for its normal purpose or 
in accordance with Emfit’s instructions on installation or use 
failure to maintain the product in accordance with Emfit’s in-
structions on proper maintenance installation or use of the 
product in a manner inconsistent with the technical or safety 
laws or standards in the country where it is installed or used
ii. the condition of or defects in systems with which the prod-
uct is used or incorporated except other Emfit’s products de-
signed to be used with the product
iii. use of the product with accessories, peripheral equipment 
and other products of a type, condition and standard other 
than prescribed by Emfit
iv. repair or attempted repair by persons who are not Emfit 
employees
v. adjustments or adaptations without Emfit’s prior written 
consent, including:
upgrading the product beyond specifications or features 
described in the instructions for use, or modifications to the 
product to conform it to national or local technical or safety 
standards in countries other than those for which the prod-
uct was specifically designed and manufactured
vi. neglect
vii. accidents, fire, liquids, chemicals, other substances, flood-
ing, vibrations, excessive heat, improper ventilation, power 
surges, excess or incorrect supply or input voltage, radiation, 
electrostatic discharges including lighting, other external 
forces and impacts.
This guarantee covers only hardware components of the 
product.

14. Warranty information

EXCLUSIONS AND LIMITATIONS

Except as stated above, Emfit makes no warranties (express, 
implied, statutory or otherwise) regarding product or accom-
panying or constituent software quality, performance, accu-
racy, reliability, fitness for a particular purpose, or otherwise. 
If this exclusion is not permitted or fully permitted by appli-
cable law, Emfit excludes or limits its warranties only to the 
maximum extent permitted by applicable law. Any warranty 
that cannot be fully excluded will be limited (as far as per-
mitted by applicable law) to the duration of this Guarantee.

Emfit’s only obligation under this Guarantee is to repair or 
replace products subject to these Guarantee terms and con-
ditions. Emfit is not liable for any loss or damage relating to 
products, service, this Guarantee or otherwise, including - 
economic or intangible losses - the price paid for the prod-
uct - loss of profits, revenue, data, enjoyment or use of the 
product or any associated products - indirect, incidental or 
consequential loss or damage. This applies whether that loss 
or damage relates to: impaired or non-operation of the prod-
uct or associated products through defects or unavailability 
while with Emfit, which caused downtime, loss of user time 
or business interruption inaccuracy of output from the prod-
uct or associated products.

This applies to loss and damages under any legal theo-
ry, including negligence and other torts, breach of contract, 
express or implied warranty, and strict liability (even where 
Emfit has been advised of the possibility of such damages).
Where applicable law prohibits or limits these liability exclu-
sions, Emfit excludes or limits its liability only to the maxi-
mum extent permitted by applicable law. For example, some 
countries prohibit the exclusion or limitation of damages re-
sulting from negligence, gross negligence, wilful misconduct, 
deceit and similar acts. Emfit’s liability under this guarantee 
will in no case exceed the price paid for the product, but if 
applicable law permits only higher liability limitations, the 
higher limitations apply.

YOUR LEGAL RIGHTS RESERVED

Consumers have legal (statutory) rights under applicable 
national laws relating to the sale of consumer products. This 
guarantee does not affect statutory rights you may have nor 
those rights that cannot be excluded or limited, nor rights 
against the person from whom you purchased the product. 
You may assert any rights you have at your sole discretion.

15. Regulatory Statements

ELECTROMAGNETIC COMPATIBILITY (EMC) AND RADIO SPECTRUM MATTERS (ERM)

EUROPEAN UNION:
Declaration of Conformity 

We, the manufacturer Emfit Ltd., hereby declare that Emfit 
QS model IP-9360 complies with the essential requirements 
of EMC directive 2004/108/EC , R&TTE directive 1999/5/EC 
and CE mark directive 93/68/EEC and carries the CE marking 
accordingly. Manufacturer’s undersigned declaration of con-
formity (EU) is available by request from the manufacturer.

USA:
FCC notice to users

Contains FCC ID: W7OMRF24WG0MAMB
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) this device 
may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that 
may cause undesired operation.

Содержание L-0656
























Отзывы: