manualshive.com logo in svg

Emerson WESTFIELD CF680BQ00, Руководство пользователя

Поделиться
Скачать
Emerson WESTFIELD CF680BQ00 Скачать руководство пользователя страница 15

15

Trouble Shooting

TROUBLE

PROBABLE CAUSE

SUGGESTED REMEDY

1. Fan will not 

1. Fuse or circuit breaker 

1. Check main and branch

start.

blown.

circuit fuses or circuit
breakers.

2. Loose power line  

2. Check power line connections 

connections to the fan, or 

to fan, and switch wire

loose switch wire 

connections in the switch cup.

connections in the switch 
cup.

WARNING: Make sure 
main power is turned off.

2. Fan sounds 

1. Blades not attached to fan.

1. Attach blades to fan before

noisy.

operating.

2. Screws securing fan blade

2. Check to make sure the 

flanges to motor are loose. 

screws which attach the 
blade flanges to the motor
are tight. 

3. Wire connectors inside 

3. Check to make sure wire

switch cup rattling.

connectors in switch cup 
are not rattling against each
other or against the interior
wall of the switch cup.
WARNING: Make sure main
power is turned off.

4. Screws holding blades to 

4. Tighten screws securely.

flanges are loose.

5. Loose screws in motor

5. Check to make sure all

housing.

screws in motor housing
are snug (not over-tight).

3. Fan wobbles

1. Setscrews in motor coupling 

1. Raise upper housing cover and

excessively.

are not tightened securely.

and upper housing, then
tighten setscrews securely.

2. Setscrew in the hanger ball/

2. Tighten the setscrew in the

downrod assembly is loose.

hanger ball/downrod
assembly.

3. Screws securing fan blade 

3. Check to be sure screws 

flanges to motor are loose.

which attach the fan blade 
flanges to the motor are
tight.

4. Fan blade flanges not 

4. Check to be sure that the

seated properly.

fan blade flanges seat firmly
and uniformly to the surface
of the motor. If flanges are
seated incorrectly, loosen
the flange screws and
retighten according to 
Step 5 and Figure 2.

5. Hanger bracket and/or 

5. Tighten the hanger bracket

ceiling outlet box is not

screws to the outlet box,

securely fastened.

and/or secure outlet box.

6. Fan blades out of balance.

6. Interchanging an adjacent

(side-by-side) blade pair can 
redistribute the weight and
result in smoother operation. 
Or use supplied balancing
kit to balance blades.

WARNING: 

FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX

OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.

!

!

!

BP7305 Westfield  6/30/06  12:10 AM  Page 15

Содержание WESTFIELD CF680BQ00





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды