manualshive.com logo in svg

Emerson USB Fieldbus Interface, Руководство пользователя, Страница: 8 / 59

Поделиться
Скачать
Emerson USB Fieldbus Interface Скачать руководство пользователя страница 8

Indicator light scenarios

Table 2-1:   

Power

indicator

light

Field

connection

indicator light

Scenarios

Normal scenarios

Green

Green

The USB Fieldbus Interface is connected to an externally

powered segment and is able to communicate.

Amber

Green

The USB Fieldbus Interface is providing power to a fieldbus

segment and is able to communicate.

Other scenarios

Off

Off

The USB Fieldbus Interface is not connected to a powered

computer.

-OR-

The USB Fieldbus Interface is connected to a computer but

the computer power is off.

-OR-

The USB FF HSE Server is not running on the connected

computer.

Green

Off

The USB Fieldbus Interface is not connected to a powered

segment.

-OR-

The USB Fieldbus Interface is connected to a powered

segment with the wrong polarity.

Off

Green

The USB Fieldbus Interface is connected normally to a

powered segment but the USB FF HSE Server is not running.

Amber

Red

The USB Fieldbus Interface is providing power but a short

circuit has been detected on the field connection.

Amber

Off

The USB Fieldbus Interface is providing power and

connected to an already powered fieldbus segment with

reverse polarity.

Amber

Amber

The USB Fieldbus Interface is providing power to a fieldbus

segment and the load on that segment has exceeded its

limit.

User's Manual

May 2014

8

Содержание USB Fieldbus Interface




























































Отзывы:

Нет отзывов