4310 Wireless Position Monitor
Instruction Manual
October 2009
17
Online
1 Overview
2 Configure
3 Service Tools
Service Tools
1 Show Active Alerts
2 Variables
3 Run Time Extremes
4 Maintenance
Run Time Extremes
1 Max Recorded Temp
2 Date of Max Temp
3 Min Recorded Temp
4 Date of Min Temp
Maintenance
1 Calibration
2 Reset Device
Variables
1 Switch Status
2 Electronics Temp
3 Power Module Voltage
4 Accumulated Cycles
5 Time Since Reset
3
Field Communicator
1 Offline
2 Online
3 Frequency Device
4 Utility
3-2
3-3
3-4
Calibration
1 Calibration Status
2 Calibration Date
3 Calibrate
3-4-1
Figure 17. Field Communicator Menu Tree—Service Tools
D
Power Module Voltage—indicates the status of
the power module voltage.
D
Accumulated Cycles—indicates the number of
accumulated cycles.
D
Time Since Reset—indicates the time (in hours,
minutes, and seconds) since the last time the 4310
was restarted.
Run Time Extremes
D
Max Recorded Temp—indicates the maximum
recorded temperature of the 4310.
D
Date of Max Temp—indicates when the
maximum temperature was recorded.
D
Min Recorded Temp —indicates the minimum
recorded temperature of the 4310.
D
Date of Min Temp—indicates when the
minimum temperature was recorded.
Maintenance
D
Calibration
Calibration Status—indicates the status of the last
instrument calibration.
Calibration Date—indicates when the instrument
was last calibrated.
Calibrate—allows you run a calibration on the
instrument. Follow the prompts on the Field
Communicator to calibrate the instrument.
D
Reset Device—performs a reset of the
instrument firmware.
