6
TESCOM™ 44-6800 E Series
Content
October 2020
Installation, Operations and Maintenance Manual
TR000058ENUS-02_10-20
•
Do not interconnect vent lines; use separate lines if more than one vent is needed.
Do not locate regulators, valves or accessories controlling flammable fluids near open
flames or any other source of ignition.
•
Some fluids when burning do not exhibit a visible flame. Use extreme caution when in
specting and/or servicing systems using flammable fluids to avoid death or serious
injury to personnel. Provide a device to warn personnel of these dangerous conditions.
•
Many gases can cause suffocation. Make certain the area is well ventilated. Provide a
device to warn personnel of lack of Oxygen.
•
Never use oil or grease on these regulators unless recommended as specified in Operations
and Service procedures. Oil and grease are easily ignited and may combine violently
with some fluids under pressure.
•
Have emergency equipment in the area if toxic or flammable fluids are used.
•
Upstream filters are recommended for use with all fluids.
•
Do not bleed system by loosening fittings.
•
Prevent icing of the equipment by removing excess moisture from the gas.
•
Always use proper thread lubricants and sealants on tapered pipe threads.
