Emerson Smart Wireless Gateway 1420 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 20

Emerson Smart Wireless Gateway 1420 Скачать руководство пользователя страница 2

Quick Installation Guide

00825-0100-4420, Rev DA

July 2009

1420 Wireless Gateway

2

© 2009 Rosemount Inc. All rights reserved. All marks property of owner.

IMPORTANT NOTICE

This installation guide provides basic guidelines for the 1420 Wireless Gateway. It does
not provide instructions for detailed configuration, diagnostics, maintenance, service,
troubleshooting, or installations. Refer to the 1420 Wireless Gateway reference manual
(document number 00809-0100-4420) for more instruction. The manual and this QIG are
also available electronically on www.rosemount.com.

WARNING

Explosions could result in death or serious injury:

Installation of this device in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Please
review the Hazardous Locations Certifications for any restrictions associated with a safe
installation.

Electrical shock can result in death or serious injury

• Avoid contact with the leads and terminals. High voltage that may be present on leads

can cause electrical shock.

WARNING

Explosion Hazard

Do not disconnect equipment when a flammable or combustible atmosphere is present.

IMPORTANT NOTICE

The 1420 Wireless Gateway should be installed before installing any other wireless
devices. This will result in a simpler and faster network installation.

Emerson Process Management
Rosemount Division

8200 Market Boulevard
Chanhassen, MN USA 55317
T (US) (800) 999-9307
T (Intnl) (952) 906-8888
F (952) 949-7001

Rosemount Temperature GmbH

Frankenstrasse 21
63791 Karlstein
Germany
T 49 (6188) 992 0
F 49 (6188) 992 112

Emerson Process Management
Asia Pacific Private Limited

1 Pandan Crescent
Singapore 128461
T (65) 6777 8211
F (65) 6777 0947 / (65) 6777 0743
[email protected]

00825-0100-4420_Rev_DA.fm Page 2 Friday, July 17, 2009 10:15 AM

«
1
2
3
4
...
»

Содержание Smart Wireless Gateway 1420





















Отзывы:

Нет отзывов