SEMPELL
SERIES S, TYPES SO, SC, SB, SOH FULL-LIFT SAFETY VALVES
OPERATING INSTRUCTIONS
Before installation these instructions must be fully read and understood
ATTENTION
This operating instruction does not specify the
extent of delivery. It is valid for several sizes,
designs, accessories and additional devices.
It contents generally exceeds the contractual
determined extent of delivery.
Type
Series S, types SO, SC, SB, SOH full-lift
safety valves
Orifice letter D - Z
Design
• Spring-loaded
• With DIN and ANSI connections
• According to API Standard 526
• According to AD A2, TRD 421
For the application of a pneumatic drive A 160
see corresponding operating instruction
VCIOM-02239.
Observe design data on the nameplate!
VCIOM-02373-EN 16/07
1 DANGER AND WARNING INDICATIONS
The construction of the Sempell safety valves
of the series S corresponds to the standard
technology and the valid safety regulations.
Nevertheless, improper use or improper
installation can cause risks for the personnel
or can lead to restrictions in regard of the
operational safety. Therefore, the Sempell
GmbH recommends the operator of the safety
valves to take appropriate measures and make
sure that the present operating instructions
are read and understood by the assigned
personnel.
APPLICATION LIMITS
It is only allowed to use the valves according to the
details of this operating instruction and according
to the parameters and application cases agreed
in the delivery contract (see nameplate). The
application of the valve has to take place adequate
to the medium tolerances of the used materials.
WARNINGS FOR THE OPERATING AND
MAINTENANCE PERSONNEL
Before commissioning and maintenance works
familiarise yourself with the legal accident
prevention regulations, the local safety
instructions and this operating instruction and
observe them.
Use the safety valve and its individual parts and
accessories only for the purpose intended by us.
MA.280.01.1215 E
Emerson.com/FinalControl
© 2017 Emerson. All rights reserved.
