manualshive.com logo in svg

Emerson Rosemount TupHFET TF396, Быстрый старт, Страница: 7 / 36

Поделиться
Скачать
Emerson Rosemount TupHFET TF396 Скачать руководство пользователя страница 7

2

Install

2.1

Unpack and inspect

 WARNING

Buffer solution in the vinyl boot may cause skin or eye irritation.

 CAUTION

Wet electrode tip at all times to maximize storage life.

 CAUTION

Cable connection at back of sensor body is fragile.

Do not overtighten.

Procedure

1. Inspect the outside of the carton for any damage. If you detect

damage, contact the carrier immediately.

2. Inspect the hardware. Make sure all the items on the packing list are

present and in good condition. Notify the factory if any part is
missing.

Postrequisites

If the sensor appears to be in satisfactory condition, proceed to .

Note

Save the original packing cartons and materials as most carriers require
proof of damage due to mishandling, etc. Also, if you need to return the
sensor to the factory, you must pack it in the same manner as it was
received. Refer to for return instructions. If storing the sensor, fill the vinyl
boot with pH buffer solution and replace it on the sensor tip until you are
ready to use it.

March 2020

Quick Start Guide

Quick Start Guide

7

Содержание Rosemount TupHFET TF396





































Отзывы:

Нет отзывов