![Emerson Rosemount TCL Скачать руководство пользователя страница 30](http://html.mh-extra.com/html/emerson/rosemount-tcl/rosemount-tcl_manual_103740030.webp)
For best EMI/RFI protection, use shielded output signal cable enclosed in earth-grounded
metal conduit.
Keep output signal wiring separate from power wiring. Do not run signal and power or
relay wiring in the same conduit or close together in a cable tray.
4.3.3
Alarm wiring
The alarm relay terminal strip is located just below the power connector on the power
supply board.
See
Alarm relay connections
Figure 4-3:
Keep alarm relay wiring separate from signal wiring. Do not run signal and power or relay
wiring in the same conduit or close together in a cable tray.
4.4
Sensor wiring
If it is necessary to replace the sensor cable, refer to the instructions below.
1.
Shut off power to the transmitter.
Wiring
22
Rosemount TCL
Содержание Rosemount TCL
