Emerson ROSEMOUNT Analytical SPS 4000 B201110, Инструкция по эксплуатации

Страница: 9 / 42

Instruction Manual
IB-106-340AC Rev. 1.3
January 2003
Rosemount Analytical Inc. A Division of Emerson Process Management Description and Specifications 1-1
SPS 4000
SECTION 1
DESCRIPTION AND SPECIFICATIONS
NOTE
The SPS 4000 Single Probe Autocalibration Sequencer operates exactly the same with either
the Oxymitter 4000 Oxygen Transmitter or the Oxymitter 5000 Oxygen Transmitter with
F
OUNDATION
fieldbus Communications. Any references to the Oxymitter 4000 throughout this
instruction bulletin also include the Oxymitter 5000. When referred to an instruction bulletin
for more information, reference IB-106-340 for the Oxymitter 4000 and IB-106-340-FB for the
Oxymitter 5000.
1-1 COMPONENT CHECKLIST
A typical SPS 4000 Single Probe Autocalibra-
tion Sequencer should contain the items shown
in Figure 1-1. Record the part number, serial
number, and order number for the SPS 4000 on
the first page of this manual.
Also, use the product matrix in Table 1-1 to
compare your order number against your unit.
The first part of the matrix defines the model.
The last part defines the various options and
features of the sequencer. Ensure the features
and options specified by your order number are
on or included with the unit.
1-2 OVERVIEW
The SPS 4000 provides the capability of per-
forming automatic, timed or on demand, calibra-
tions of a single Oxymitter 4000 without sending
a technician to the probe site.
The SPS 4000 can be mounted either directly to
an In situ Oxymitter 4000 or at a remote location
if space is limited. See Figure 1-2. However, this
instruction bulletin only covers remote mounted
sequencers. For information regarding integrally
mounted sequencers, refer to the Oxymitter
4000 Oxygen Transmitter Instruction Bulletin.
For information on equipping your existing
Oxymitter 4000 with an integrally mounted SPS
4000, contact Rosemount.
2
1
3
26010001
1. Instruction Bulletin
2. SPS 4000 (shown with optional reference air com-
ponents)
3. Optional Mounting Hardware (for pipe mounting)
Figure 1-1. Typical SPS 4000 Package
1