Emerson Rosemount 3308, Справочное руководство

Страница: 56 / 128

Reference Manual
00809-XXXX-4811, Rev AA
February 2012
Rosemount 3308
5-2
PRELIMINARY
DEVICE NETWORK
CONFIGURATION
To communicate with the Gateway, and ultimately the host system, the
transmitter must be configured to communicate with the wireless network.
Using a Field Communicator or AMS Wireless Configurator, enter the
Network ID and Join Key so they match the Network ID and Join Key of the
Gateway and the other devices in the network. If the Network ID and Join Key
are the same as the Gateway, the transmitter will not communicate with the
network. The Network ID and Join Key may be obtained from the Gateway on
the
Setup>Network>Settings page on the Gateway's integrated web server,
shown in Figure 5-1.
Figure 5-1. Gateway Network
Settings
AMS
Right click on the Rosemount 3308 transmitter and select Configure . When
the menu opens, select Join Device to Network and complete the method to
enter the Network ID and Join Key.
Field Communicator
Connect the field communicator leads to the COMM terminals on the terminal
block as shown in Figure 5-2.
Figure 5-2. Terminal Block with
COMM terminals
The Network ID and Join Key may be changed in the wireless device on a
Field Communicator by using the Fast Key Sequence shown in Table 5-1.
Table 5-1. Rosemount 3308
Fast Key Sequence
P/N 00753-9200-2410
COMM terminals
Function Key Sequence Menu Items
Join Device to Network 2, 1, 2 Network ID, Set Join Key